The Highgrove range incorporates a gold edged ribbon in the design.
All Rosettes are fitted with a safety pin.
Tapes 6p extra, Bridle Clips 9p extra.
All printing is included on orders over £50.00 (excluding vat).
Under £50, there is a charge of £6.75 plus vat.
Blocked tails are 30p each.
A - HR Majestic - Diameter left to right 200mm. Tail 450mm x 36mm.
B - HR Premier - Diameter left to right 170mm. Tail 410mm x 36mm.
C - HR Special - Diameter left to right 145mm. Tail 290mm x 36mm.
D - HR3A - Diameter left to right 135mm. Tail 260mm x 36mm.
E - HR2A - Diameter left to right 105mm. Tail 180mm x 36mm.
F - HR1A - Diameter left to right 95mm. Tail 180mm x 24mm.
G - HR Mini - Diameter left to right 70mm. Tail 70mm x 24mm.
|Rosette Name||1 - 99||100 - 999||1000+|
|A - HR Majestic (4 tier)||£7.72|
|B - HR Premier (3 tier)||£5.59|
|C - HR Special (2 tier)||£4.59|
|D - HR3A (3 tier)||£2.05||£1.99||£1.95|
|E - HR2A (2 tier)||£1.60||£1.55||£1.50|
|F - HR1A (1 tier)||£1.39||£1.34||£1.28|
|HRMini Star (1 tier)||£1.06||£1.03||£0.98|
|G - HRMini (1 tier)||£0.82||£0.79||£0.77|
All above prices are subject to vat at the current rate of 20%
All wording for the centres on our rosettes is set by hand around the outside and in the middle or the rosette centre, this is included in the price of the rosette. Unless otherwise requested, printing is in Gold foil. Other print colours are available, Red - Burgundy - Pale Blue - Royal Blue - Yellow - Pale Green - White - Silver - Bronze (once a colour foil is chosen, then that colour must be used for the whole order).
However if you require a club logo or design in the centre, there is a charge of £19.10 per block. This charge includes the artwork which we can do for you. These blocks remain your property but Dalsetter will retain them until such time as you require them back.
Rosette centres are 55mm in diameter except for Mini rosettes which are 35mm in diameter.
Rosette Tail printing is 30p per tail (with NO extra charge for change of wording).
Rosettes are available with safety pin (included in price), tape (6p extra) or bridle clip fittings (9p extra).
Measurements of rosettes may vary as each one is assembled by hand.
The Elizabethan Ruff pleat uses up to 2 metres of ribbon for a 1 tier rosette, 4 metres for a 2 tier, 6 metres for a 3 tier and even more for the Specials, Premiers and Majestics. Please bear this in mind when comparing prices as many manufacturers use a lot less ribbon, which results in a look and feel which is inferior to our rosettes. You will get a better rosette for your money with us.
Your name *